-
제품명 3M™ Novec™ 2704 Electronic Grade Coating 용도 전자용코팅 기타 포장단위: 5KG 3M™ Novec™ 2704 Electronic Grade Coating
3M™ Novec™ 2704 Electronic Grade Coating is designed for the protection of printed circuit boards and electronic components. It is a clear, low viscosity solution of a 4 wt% fluoropolymer carried in a hydrofluoroether solvent. It is UV detectable.
Features and Benefits
· Easy application and processing – dries in seconds without the need for thermal post-curing
· Requires little or no masking
· Allows solder-through repairability and is easily removed for rework & repair
· Contains a low level of volatile organic compounds (VOCs) and has low global warming potential
· Is thermally and electrically stable with excellent dielectric properties
· Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists
· Contains a UV fluorescent dye incorporated into the polymer for improved QC inspection
Suggested Applications
· Provides excellent moisture, chemical and corrosion protection to printed circuit boards and their components
· Is an easy and cost effective alternative to conformal coatings
· Can be used as a durable hydrophobic or oleophobic surface treatment in many diverse applications
Can serve as:
· an anti-stiction coating for liquid crystal displays, micromotors or MEMS (Micro Electronic Mechanical Systems) components
· an anti-migration coating for displays, spindle motors or lubricated electronic parts
· an anti-corrosion coating for a variety of materials and components
Additional Information
3M™ Novec™ 2704 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electronic components. It is a low viscosity, low surface tension solution of a 4 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent.
The coating dries to a thin, transparent, film with excellent hydrophobic and oleophobic properties. It repels oils, water, silicones and photoresist solutions. The coating is easy to apply (dip, spray or syringe dispensing), air-dries in seconds, requires little or no masking and is removable and repairable.Product Attributes
Application Corrosion Protection, Migration Resistance, Moisture Protection, Stiction Reduction Application Category Coating Application Method Solution applied by dipping (preferred), spray, or syringe dispense Available Container Sizes 11 lb (5 kg) 1 Gal Container, 33 lb (15 kg) 3.5 Gal Container Brand Novec Coating Location Inside Electronic Device Coating Thickness (Dip Coated) 200 nm - 1 µm (depending on application method) Dry Time 5-60 Seconds Polymer Type Fluoroacrylate Product Series Novec 2704 Product Use Composites, Printed Circuit Boards (PCB), Solder Joints, Surface Mount Components Removability Removable with a variety of 3M™ Novec™ Engineered Fluids Solids Level 4% Thermal Cure Time and Temperature No need to cure
Product Disclaimer
· See Technical Data Sheet (TDS) for proper use recommendations and Material Safety Data Sheet (MSDS) for safety information.
· The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes.
· 3M products shown on this website may not be available in all geographic regions or may not be available at this time. Please contact your local sales representative to determine product availability.
포장단위: 11LB (5KG) / Bottle.
제품문의: 010-3178-7815 / 케미스(주) / 한국쓰리엠 EMMD 대리점 /
출처 
